How Much Does It Cost To Install Chainlink Fence?
$14.20
Cost To Install Chainlink Fence
Installing a fence around your property helps keep out strays and prying eyes, and keep in your own loved ones and other valuables. Good fences make good neighbors!
The chain link fence is a most utilitarian style that offers greatest boundary closure security.
You will find that the cost to install an average galvanized steel chainlink fence depends on the length of fence, number of corners and gates, the accessibility of the terrain to be fenced, and the labor rate.
In the following tables the Labor Cost figures are what the able DIY person should expect to save by performing the complete installation.
Perimeter fence: to enclose a 60’ x 120’ city lot with 360 feet of 60” tall chainlink fence with one drive-through gate.
| Item | Unit Cost | Quantity | Line Cost | |
|---|---|---|---|---|
| 1. Chainlink Fence: galvanized steel 2" mesh; 2-3/8" corner poles, 1-1/2" line poles and top rail; concrete post holes; including waste. | $6.04 | per foot | 380 | $2,294 |
| 2. Gates²: 1 driveway gate, made up of 2 units 4' wide x 60" tall and with closing latches. | $218 | each | 2 | $437 |
| 3. Equipment rental³: power post-hole digger; and power cement mixer. | $25 | per day | 4 | $100 |
| Material Cost | $7.86 | per foot | 360 | $2,831 |
| 4. + Labor Cost | $38 | per hour | 60 | $2,280 |
| Total Cost | $14.20 | per foot | 360 | $5,111 |
Perimeter fence: to enclose a 60’ x 120’ city lot with 360 feet of 72” tall chainlink fence and one drive-through gate.
| Item | Unit Cost | Quantity | Line Cost | |
|---|---|---|---|---|
| 1. Chainlink Fence: galvanized steel 2" mesh; 2-3/8" corner poles, 1-1/2" line poles and top rail; concrete post holes; incl. waste. | $6.98 | per foot | 380 | $2,653 |
| 2. Gates: 2 gates each 4' wide x 72" tall with closing latches; installed for drive-through. | $227 | each | 2 | $454 |
| 3. Equipment rental: power posthole digger; and power cement mixer. | $25 | per day | 4 | $100 |
| Material Cost | $8.91 | per foot | 360 | $3,207 |
| 4. + Labor Cost | $38 | per hour | 60 | $2,280 |
| Total Cost | $15.24 | per foot | 360 | $5,487 |
Other considerations and costs
- Taxes and permit fees are not included.
- Adding vinyl privacy weave into the chainlink will add about $8 per linear foot of fence including labor, or about $2,880 extra in the 72” chainlink example above.
- Be certain of property line location and local regulations regarding fence installation setback and regarding concrete post-footing requirements.
Check out our guide if you need a loan for your home improvement project.
DIY considerations
- This installation may be suitable for able DIY persons.
- It requires at least two physically able and prepared persons with special link-fencing tools and alignment skills in addition to concrete mixing and hole-digging.
References
- Craftsman Estimator Costbook, complete series year 2015.
- Latest prices found on Home Depot and other vendor Web sites.
- Literature review of DIY Web sites.
Enter your zip code to get estimates
Cost by city
- New York, NY$22.81
- Bronx, NY$18.74
- Brooklyn, NY$15.62
- Philadelphia, PA$19.49
- Washington, DC$16.91
- Atlanta, GA$15.30
- Miami, FL$13.92
- Fort Lauderdale, FL$14.58
- Minneapolis, MN$17.10
- Chicago, IL$19.92
- Houston, TX$20.55
- San Antonio, TX$13.80
- Austin, TX$15.62
- Denver, CO$13.20
- Phoenix, AZ$13.92
- Las Vegas, NV$15.28
- Los Angeles, CA$17.22
- San Diego, CA$15.63
- San Jose, CA$18.87
- Seattle, WA$13.82
Local costs have been calculated by accounting for labor and material cost differences across different cities. To get accurate cost estimates, indicate yours: